Saleeby was formerly a research staff member from Oak Ridge National Laboratory where he was in the Manufacturing Science Division. His work focuses on connecting machines and manufacturing processes with Industry 4.0 and Industrial IoT technologies. Current interests center on applications of data analytics and closed-loop control for Hybrid Manufacturing processes, where additive and subtractive (machining) processes are combined within a single machine tool.

Dr. Emily D. Sanders is an Assistant Professor in the Woodruff School of Mechanical Engineering at Georgia Tech. She obtained her Ph.D. at Georgia Tech in 2021, where she developed new topology optimization methods for design of tension-only cable nets, elastostatic cloaking devices, and multiscale structures and components. Dr. Sanders hold a bachelor’s degree from Bucknell University and a master’s degree from Stanford University.

Professor Kurfess began his academic career at Carnegie Mellon University where he rose to the rank of Associate Professor. In 1994, he moved to the Georgia Institute of Technology where he rose to the rank of Professor in the George W. Woodruff School of Mechanical Engineering. In 2005, he was named Professor and BMW Chair of Manufacturing in the Department of Mechanical Engineering at Clemson University’s International Center for Automotive Research. In 2012, he returned to Georgia Tech as a Professor of Mechanical Engineering and the HUSCO/Ramirez Distinguished Chair in Fluid Power and Motion Control.

During 2012-2013, Dr. Kurfess was on leave serving as the Assistant Director for Advanced Manufacturing at the Office of Science and Technology Policy in the Executive Office of the President of the United States of America. In this position he had responsibility for engaging the Federal sector and the greater scientific community to identify possible areas for policy actions related to manufacturing. He was responsible for coordinating Federal advanced manufacturing R&D, addressing issues related to technology commercialization, identifying gaps in current Federal R&D in advanced manufacturing, and developing strategies to address these gaps. During  2019-2021 he was on leave serving as the Chief Manufacturing Officer and the Founding Director for the Manufacturing Science Division at Oak Ridge National Laboratory, where he was responsible for strategic planning in advanced manufacturing.

Professor Kurfess has served as a special consultant of the United Nations to the Government of Malaysia in the area of applied mechatronics and manufacturing, and as a participating guest at the Lawrence Livermore National Laboratory in their Precision Engineering Program. He has testified in a number of patent cases, including testifying at the International Trade Commission (ITC). He is currently the President of the American Society of Mechanical Engineers (ASME) and also serves on the Board of Governors of ASME. He is the CTO of the National Center for Manufacturing Sciences (NCMS) and serves on its Board of Directors. He also serves on the Board of Directors for the National Center for Defense Manufacturing and Machining (NCDMM), and on the Board of Trustees of the MT Connect Institute. He served on the Board of Directors for the Society of Manufacturing Engineers (SME) and was the President of SME in 2018. He is an appointed member of the Department of Energy, National Nuclear Security Administration, Advisory Committee for Nuclear Security, and an appointed member of the Department of the Navy Science and Technology Board.

His research focuses on the design and development of advanced systems targeting the automotive sector (OEM and supplier) including vehicle and production systems. He has significant experience in high precision manufacturing and metrology systems. He has received numerous awards including a National Science Foundation (NSF) Young Investigator Award, an NSF Presidential Faculty Fellowship Award, the ASME Pi Tau Sigma Award, SME Young Manufacturing Engineer of the Year Award, the ASME Blackall Machine Tool and Gage Award, the ASME Gustus L. Larson Award, an ASME Swanson Federal Award, and the SME Education Award. He is an elected member of the National Academy of Engineering, and a Fellow of the AAAS, the SME and the ASME.

Dr. Jianjun Shi is the Carolyn J. Stewart Chair and Professor in H. Milton Stewart School of Industrial and Systems Engineering, with joint appointment in the George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology. Prior to joining Georgia Tech in 2008, he was the G. Lawton and Louise G. Johnson Professor of Engineering at the University of Michigan. He received his B.S. and M.S. in Electrical Engineering from the Beijing Institute of Technology in 1984 and 1987, and his Ph.D. in Mechanical Engineering from the University of Michigan in 1992. Dr. Shi is a pioneer in the development and application of data fusion for quality improvements. His methodologies integrate system informatics, advanced statistics, and control theory for the design and operational improvements of manufacturing and service systems by fusing engineering systems models with data science methods. He has produced 40 Ph.D. graduates, 27 of which have joined IE department as faculty members. Among them, 7 have received NSF CAREER Awards and one has received the NSF PECASE award. He has published one book and more than 180 papers. He has served as PI and co-PI for projects totaling more than 25 million dollars, which were funded by National Science Foundation, NIST Advanced Technology Program, Department of Energy, General Motors, Daimler-Chrysler, Ford, Boeing, Lockheed-Martin, Honeywell, Pfizer, Samsung, and various other industrial companies and funding agencies. The technologies developed in Dr. Shi’s research group have been widely implemented in various production systems with significant economic impacts. 

Dr. Shi is the founding chair of the Quality, Statistics and Reliability (QSR) Subdivision at the Institute for Operations Research and Management Science (INFORMS). He has served as the Editor-in-Chief of the IISE Transactions (2017-2020), the flagship journal of the Institute of Industrial and Systems Engineers. He also served as the Focus Issue Editor of IISE Transactions on Quality and Reliability Engineering (2007-2017), editor of Journal of System Science and Complexity, and advisory editor of Journal of Quality Technology and Quantitative Management (QTQM). He is a Fellow of American Society of Mechanical Engineering (ASME), a Fellow of the Institute of Industrial and Systems Engineering (IISE), a Fellow of Institute of Operations Research and the Management Science (INFORMS), a Fellow of Society of Manufacturing Engineering (SME), an Academician of the International Academy for Quality, and a member of National Academy of Engineering (NAE) of the USA. 

Dr. Shi received various awards for his research and teaching, including the George Box Medal (2022), ASQ Walter Shewhart Medal (2021), The S. M. Wu Research Implementation Award (2021), ASQ Brumbaugh Award (2019), The Horace Pops Medal Award (2018), IISE David F. Baker Distinguished Research Award (2016), the IIE Albert G. Holzman Distinguished Educator Award (2011), Forging Achievement Award from Forging Industry Educational and Research Foundation (2007), Monroe-Brown Foundation Research Excellence Award (2007), the 1938E Award (1998) at The University of Michigan, and NSF CAREER Award (1996).

Dr. Liang began at Tech in 1990 as an assistant professor. Previously, he was an assistant professor at Oklahoma State University. He was named to the Bryan Professorship in 2005. He was President of Walsin-Lihwa Corporation in 2008-2010.

Wang's research is in the areas of design, manufacturing, and Integrated computational materials engineering. He is interested in computer-aided design, geometric modeling and processing, computer-aided manufacturing, multiscale simulation, and uncertainty quantification.

Currently, Wang studies integrated product-materials design and manufacturing process design, where process-structure-property relationships are established with physics-based data-driven approaches for design optimization. The Multiscale Systems Engineering research group led by him develops new methodologies and computational schemes to solve the technical challenges of high dimensionality, high complexity, and uncertainty associated with product, process, and systems design at multiple length and time scales.

Computational design tools for multiscale systems with sizes ranging from nanometers to kilometers will be indispensable for engineers' daily work in the near future. The research mission of the Multiscale Systems Engineering group is to create new modeling and simulation mechanisms and tools with underlying scientific rigor that are suitable for multiscale systems engineering for better and faster product innovation. Our education mission is to train engineers of the future to gain necessary knowledge as well as analytical, computational, communication, and self-learning skills for future work in a collaborative environment as knowledge creators and integrators.